3Gen DermLite handyscope FFH2 사용 설명서 - 페이지 3

{카테고리_이름} 3Gen DermLite handyscope FFH2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Gen DermLite handyscope FFH2 13 페이지.

페이지 인쇄

Instructions

CAUTION: Prior to using this de-

vice, read these instructions and

keep them in a safe place for future

reference. Rx only. This device is

designed for external examination

only within professional healthcare

facilities by medical professionals.

CAUTION: Do not use the device in

fire or explosive risk area (e.g. ox-

ygen-rich environment).

CAUTION: This product contains

glass. Dropping or mishandling de-

vice may cause glass breakage. Be

careful when handling broken glass;

glass may be very sharp.

WARNING: This product contains

magnets. Do not use in proximity of

pacemakers or other magnetically

sensitive devices or items.

NOTE: This product may interfere

with Qi wireless charging. Do not

charge your mobile device wireless-

ly while Ring or Wings are attached.

EMI Compatibility

This Product conforms to the elec-

tromagnet emissions standard IEC

60601-1-2: 2014.

The EMISSIONS characteristics of

this equipment make it suitable

for use in residential environment.

If interference to radio-frequency

communication services occurs, the

user might need to take mitigation

measures, such as relocating or re-

orienting the equipment.

Portable and mobile RF communi-

cations equipment can affect medi-

cal electrical equipment.

Use of this equipment adjacent to

or stacked with other equipment

should be avoided because it could

result in improper operation. If such

use is necessary, this equipment

and the other equipment should be

observed to verify that they are op-

erating normally.

Use of accessories, transducers and

cables other than those specified or

provided by the manufacturer of this

equipment could result in increased

electromagnetic emissions or de-

creased electromagnetic immunity

of this equipment and result in im-

proper operation.

This device complies with part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

This device may not cause harm-

ful interference, and (2) this device

must accept any interference re-

ceived, including interference that

may cause undesired operation.

Any changes/modifications to this

equipment not approved by 3Gen

could void the user's authority to op-

erate the equipment.

Directions for Use

Handyscope® is a smartphone

dermatoscope with polarized and

non-polarized light, clinical illumi-

nation and wireless functionality.

CAUTION: Do not look directly into

the LED light. Patients must close

their eyes during examinations.

CAUTION: Check the correct opera-

tion of the device before use! Do not

use the device if there are visible

signs of damage or the lights begin

to flash.

IMPORTANT: Before initial use,

please charge the internal lithium

ion battery. See "Battery & Charg-

ing" for details.

Handyscope may be attached to

most smartphones using the in-

cluded

adhesive-backed

steel

MagnetiConnect® Ring (R) or

Wings (W), depending on your

phone's camera position. For the

strongest hold on phones, espe-

cially those with a backside made

of glass, peel off the liner of the

Ring Guide (RG) or Wing Guide

(WG) in order to expose its adhe-

sive back and place it over the Ring

Film (RF) or Wing Films (WF).

Fig. 1: Handyscope may be at-

tached to most smartphones us-

ing the included adhesive-backed

steel MagnetiConnect® Ring (R)

placed at the 30 mm position. By

placing the 30 mm crosshairs (CH)

of the supplied Ring Guide (RG)

over your phone's camera, deter-

mine if your phone (or phone case)

has a flat, unobstructed area to at-

tach the steel Ring (R). If so, clean

the area with an isopropyl alcohol

wipe, remove the Ring's adhesive

film (AF) to expose its adhesive

and press the Ring firmly on your

phone while keeping the cross-

hairs aligned over your camera.

The RingGuide may now be re-

moved. Place Handyscope on the

Ring, aligning its lens with your

smartphone camera. The Handy-

scope will 'click' into place when

properly placed.

Fig. 2: The 40 mm Ring position

requires the RingAdapter (RA) with

its insert (I) placed in the 40 posi-

tion (Fig. 40; pull on the snap clo-

sure (S) to release the insert).

Fig. 3: Phones with cameras lo-

cated near the center may require

the use of MagnetiConnect Wings

(W) & WingAdapter (WA). To place

them correctly, clean the back of

your phone with an isopropyl al-

cohol wipe, place the Wing Guide's

(WG) crosshair over your phone's

camera, peel off the adhesive film

and press the Wings onto your

phone. Peel WingGuide off Wings.

Place the WingAdapter (WA) onto

the Wings, then attach Handys-

cope.

Fig. 4: Handyscope may also be

used with DermLite Connection Kits

(CK; sold separately). The adhesive

Ring or Wings are most easily re-

moved from your phone using den-

tal floss (not included).

Press the power button (P) to ac-

tivate the unit in polarized mode,

press it again to activate non-po-

larized light. For clinical illumina-

tion, press the power button a third

time. Push & hold the button for

about 1 second to turn off the unit.

In order to save power, the device

turns off automatically after 3 min-

utes.

Glass Faceplate

The snap-on glass faceplate (FP)

may be removed at the fingernail

notches (FN) and reinstalled with

the reticle scale (RS) in your pre-

ferred orientation.

Smartphone Pairing

To wirelessly pair Handyscope with

your smartphone, refer to a Handy-

scope-compatible app.

IceCap®

To support your infection control

measures, snap one of the includ-

ed disposable IceCaps (IC) over the

installed faceplate (FP).

Battery & Charging

CAUTION: This device uses a spe-

cialized 3.7V 670mAh lithium ion

battery, which can only be pur-

chased from 3Gen or from an autho-

rized 3Gen dealer. Do not under any

circumstances use another battery

other than the one designed for this

unit. Doing so could result in dam-

age to the unit.

This device is equipped with a

four-level Charge Indicator (CI).

When the unit is turned on and

fully charged, all four LEDs light

up. When less than 75% of battery

life remains, three LEDs are illumi-

nated. If more than half the battery

is drained, two LEDs are on, while a

single LED indicates that less than

25% of battery capacity remains.

To charge your device, connect the

supplied USB-C to USB cable to

the Charging Port (CP) and any IEC

60950-1 compliant (5V) USB port.

The Charge Indicator (CI) pulses to

indicate charging, with the number

of pulsing LEDs corresponding

with charge level.

ENGLISH

When charging is complete, all four

indicator LEDs illuminate. From a

full charge, the device will allow

approximately 3-8 hours of opera-

tion, depending on the brightness

level used.

After years of use, you may wish to

replace the battery, which is only

available from 3Gen or an autho-

rized 3Gen dealer. To change the

battery, contact 3Gen or your local

3Gen dealer.

Troubleshooting

Please check www.dermlite.com

for the most current troubleshoot-

ing information. If your device re-

quires servicing, visit www. derm-

lite.com/service or contact your

local 3Gen dealer.

Care and Maintenance

Your device is designed for trouble-

free operation. Never attempt to

open the device for any reason. Re-

pairs shall be made only by quali-

fied service personnel.

Cleaning and Sterilization

The exterior of your device, except

the optical parts, may be wiped

clean with isopropyl alcohol (70%

vol.). The lens should be treated as

high-quality photographic equip-

ment and should be cleaned with

standard lens cleaning equipment

and protected from harmful chem-

icals. Do not use abrasive material

on any part of the equipment or im-

merse the device in liquid. Do not

autoclave.

The Handyscope set includes:

Handyscope smartphone dermato-

scope (3 polarized, 3 non-polarized

LEDs), 2 snap-in glass faceplates,

3 MagnetiConnect Rings, Ring

Guide, RingAdapter, 3 sets of Mag-

netiConnect Wings, Wing Guide,

WingAdapter, 3 sets of Ring/Wing

Film, Soft Carrying Case, lanyard,

IceCap sample supply, USB to

USB-C charging cable.

Warranty

10 years for parts and labor. The

rechargeable battery is warranted

for 1 year. Serial number and com-

pany information are located on

the unit.

Disposal

This device contains electronics

and a lithium-ion battery that must

be separated for disposal and may

not be disposed of with general

household waste. Please observe

local disposal regulations.

Technical Description

Visit www.dermlite.com/technical/

or contact your local 3Gen dealer.