diybook KG Garden Gate Closer GTS 170 조립 지침 매뉴얼 - 페이지 3
{카테고리_이름} diybook KG Garden Gate Closer GTS 170에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. diybook KG Garden Gate Closer GTS 170 7 페이지. Garden door-closer
diybook KG Garden Gate Closer GTS 170에 대해서도 마찬가지입니다: 설치 지침 (7 페이지), 마운팅 (9 페이지)
페이지 인쇄
gartentorschliesser.com
a diybook KG brand
Step 2: Check your distances and determine the position of the first bracket
First, you need to determine the distance between the garden door's pivot point and the
pivot point of the garden door-closer and then the horizontale position. For that, you
already need the first (longer) bracket of the GTS 120/170.
Distance A and Distance B taken together should not exceed 155 mm, but should
not be much less. If the sum is >= 155 mm, the door can only be opened less than
90° at worst.
TIP: We therefore recommend positioning the long bracket, which is mounted at the
garden door's pivot point, in such a fashion that the sum oft the two distances (A+B)
does not exceed 155mm to the outer hole of the bracket.
Step 3: Calibrating the bracket on it's abutment face
Now the height of the bracket mounted on the garden door's pivot point is determined.
To this end, position the spirit level in such a way that the second bracket can be
installed on the garden door without any problems while still being horizontal.
Mark the drill holes using a pen.
diybook KG
Korneuburger Straße 68-70/2
AT-2102 Bisamberg
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
Telefon: +43 2262 712 51
Telefax: +43 2262 712 51-77
E-Mail: [email protected]
Internet: https://gartentorschliesser.com
page 3