ClearView HD Cube Network Camera 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} ClearView HD Cube Network Camera에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView HD Cube Network Camera 20 페이지.

3 Quick Configuration Tool

Quick configuration tool can search current IP address, modify IP address. At the same time, you can

use it to upgrade the device.

Please note the tool only applies to the IP addresses in the same segment.

Double click the "ConfigTools.exe"icon, you can see an interface is shown as in Figure 3-1.

In the device list interface, you can view device IP address, port number, subnet mask, default

gateway, MAC address and etc.

Figure 3-1

Select one IP address and then right click mouse, you can see an interface is shown as in Figure 3-2.

Note:

You can set the IP address, subnet mask and gateway for the network camera and PC. Please note

network camera IP address and PC IP address shall be in the same network segment if there is no

router. Network camera default IP address is 192.168.1.108. If there is a router, please set the

corresponding gateway and subnet mask.

The factory default user name is admin and password is admin. For security reasons, please modify

your password after you first login.

For detailed WEB operation, please refer to the Web Operation Manual in the resource CD.