ClearView SD4250 사용자 설명서 - 페이지 5
{카테고리_이름} ClearView SD4250에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView SD4250 13 페이지. Sd encoder and modulator ypbpr & cvbs to dvb-t digital rf
페이지 인쇄OPERATIONS OF TS CREATOR SOFTWARE
Enter the SD4250 IP address, click Enter to access the Welcome screen.
On the top screen you can see 4 selections:
Encoder
/ Stream / Modulator / System
Using the same way to adjust the parameters you want to change.
Enter the default password, click Enter.
It will trigger an operation interface like below:
Click Save to save setting,
press Cancel to cancel setting.
Click the sign V to choose bit rate : 4~12Mbps
it will show √ OK.
Click Save to save setting,
click Cancel to cancel setting.
Click the sign V to choose the source:
Enter the number to change the parameters.
Click
the part you want to
setting, like : Encoder→video→
source→
Port 1
YPbPr or CVBS
Click Video bit rate to
adjust bit rate.
Click Tune color to adjust
the parameters.
Click Save to save
setting, press Cancel to
cancel setting.