Edgewater Wireless Systems, Inc. EWC24GWFR1 사용자 설명서 - 페이지 5
{카테고리_이름} Edgewater Wireless Systems, Inc. EWC24GWFR1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Edgewater Wireless Systems, Inc. EWC24GWFR1 8 페이지. Radio module
페이지 인쇄Title:
EWC24GWFR1 User Manual
3 RF Guidelines
The EWC24GWFR1 card is certified to FCC and Industry Canada specifications for use in unlicensed
band applications operating at 2.412 to 2.462 GHz.
License ID:
FCC ID: ATX-EWC24GWFR1
IC: 10165A-EWC24GWFR1
To ensure compliance to the regulations for unlicensed band radio spectrum the system integrator must
observe the following guidelines:
•
User accessible Antenna ports shall be unique connectors for purpose selected antenna
•
The maximum EIRP of the final system product with external antenna shall be limited to 30dBm
•
A system incorporating this module shall be designed by an RF Engineer such that a professional
installer can ensure that the combination of the selected antenna and maximum Transmit power
level shall not exceed maximum EIRP of 19.25dBi.
antenna gain)
•
The host communication interface to the radio module is proprietary and unique to Edgewater
Wireless (i.e. not open source). Specifically, the multi-channel interface API (Application Program
Interface) is of a unique architecture requiring specific knowledge of the configuration parameters
and data path algorithms to make it operational. Approved system Integrators must contact
Edgewater Wireless and apply for access to the required application notes that are limited to
approved integrators and is covered by non-disclosure agreements.
•
Maximum conducted Output Power
o
3 Channels 16.25dBm, +/- 0.5dBm
o
2 Channel 16.25 +/-0.5 dBm total; 13.25dBm +/- 0.5dBm per carrier
o
1 Channel 16.25 +/-0.5 dBm total; 11.55dBm +/- 0.5dBm per carrier
3.1 Compliance
Regulatory
•
This radio transmitter, 10165A-EWC24GWFR1, has been approved by Industry Canada to
operate with the antenna types listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
•
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s) .
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
•
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense. Any modifications by the user of the product may void the user's authority to operate
the product.
Antenna
•
Maximum Antenna Gain 3dBi
Edgewater Wireless Proprietary Information
Document Number: 001-00021
(16.25dBm-card output power + 3dBi
4