DIYRE G BUS 운영 매뉴얼 - 페이지 3

{카테고리_이름} DIYRE G BUS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIYRE G BUS 13 페이지. Stereo vca compressor

Welcome to the G Bus

Thank you for purchasing the G Bus. Now let's get oriented.

The G Bus is a stereo bus compressor based on a classic console with several mods and updates. The front panel

is split up accordingly, with all of the original controls to the left of the dividing line, and all of the mods to the

right. The G Bus is a balanced, line-level piece of outboard equipment. It can be used as a line insert or send

during mixing, or after a mixer or mic preamp during tracking.

If you purchased your G Bus as a DIY kit, please visit the online assembly guide:

diy.re/gbus-manual

Quick Start Guide

This manual will help you get the most out of your G Bus by covering the features in-depth, but the G Bus is also

designed to be easy and intuitive to use, so if you'd rather play around than read, just follow the steps below:

• Plug the external power supply into the

• Connect the XLR or ¼" TRS

• Connect XLR or ¼" TRS line outputs from your audio interface to the left and right

• Start compressing!

POWER INPUT

OUTPUT

jacks to line inputs on your audio interface.

jack and then into an outlet.

INPUT

combo jacks.