DiyTracker MT-18 사용자 설명서 설치 및 작동 지침 - 페이지 5

{카테고리_이름} DiyTracker MT-18에 대한 사용자 설명서 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DiyTracker MT-18 11 페이지. Real time gps tracking and monitoring system

Process

Installation

To ensure the GPS unit receives enough satellite signals at an acceptable signal strength, it must be

mounted so that it has a clear view of the sky. In hidden locations, such as under the fairing or seat,

it is important to keep any metal interference as far as possible from the top portion of the GPS unit

so that the most accurate position can be calculated.

Ensure the "gps Antenna area" is "face up" towards the sky

Any metal objects between the GPS Antenna Sensing Area and

the satellites will degrade the signal and reduce the overall performance.

The TellMe unit can be installed in any type of motorcycle. The unit should be mounted

so it will not be exposed to or get damaged from people or objects.

WARNING

Solder and insulate all connections (Crimping should be avoided wherever possible)