EDgun EDMS 매뉴얼 - 페이지 11

{카테고리_이름} EDgun EDMS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EDgun EDMS 16 페이지. Digital measuring system

2. Setting up the limit of the pressure

Please pay attention

pressure, you must first pressurize in the tank.

 The release of the button on this menu item will select the feature

 After selecting a menu item, the picture "Cancel or confirm"

 Pressing the button will cancel the action (setting the threshold)

and return to the default setting item (Pmin display). That is, if you

accidentally come here, by clicking the button, then click it again,

automatically, you just exit the menu, nothing will change.

 After waiting (that is, you understand what you are doing and do

not press the button, but wait until the pressure gauge confirms the

change), a message displayed.

 The current pressure level stored as the pressure threshold Pmin.

The pressure gauge turns off.

If the user wants to change the default factory setting (120 BAR), then this

procedure must be followed. First, determine the minimum bar setting desired.

Second, fill the air reservoir to the desired setting on the EDMS. Then go back to

the menu "SETTINGS." and change the value. For example, the desired setting is

100 bar. Reduce the air reservoir to 100 bar, go into settings and choose this

pressure range.

, that to use this menu item and change the minimum