ALTRAN RM09-43L 사용 설명서 - 페이지 4
{카테고리_이름} ALTRAN RM09-43L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALTRAN RM09-43L 10 페이지.
페이지 인쇄Please read carefully the
following instructions.
We only recommend a
professional installation.
MOTOR INSTALLATION
1. Put the motor shaft into the
end pulley.
3. Press and hold the clipping
hook and push it up.
BASIC SETTINGS OF THE REMOTE CONTROL
Before using the remote control function, the user must perform "Set
remote channel" operation, in order to store the remote control channel
into the controller. If you need to make remote control channel invalid, you
can perform the "Delete remote channel" operation.
When the rotating direction of motor is not the same as the desired
direction, you can do "Change the direction" operation for correcting it only
by working with the transmitter.
ATTENTION:
1. Each motor can record max. 16 channels. As soon as the motor receives remote control signal, it will act in response
as settings.
2. If two motors have to work together, please set the same channels for the 2 motors. This operation will not affect the
individual control function of each motor.
3. Each motor can be adapted to several remote controls. J.R113 has many functions with intermediate position. When
on-site installation it is recommended to use the J.R113 controller.
ALTRAN SOLUTIONS SL
Ctra. Valencia-Ademuz, Km 21,9.
46181 · Benissanó · Valencia · SPAIN
2. Turn the motor 90º degrees and
make it parallel with the track
4. Turn the motor 90º and
take out the motor.
INSTRUCTIONS
RM09-43L Battery
J.R113
REMOTE
LED
Up
Stop
Down
Function 1
Function 2
Channel selection
Channel setting
(Main face)
Tel.: 00 34 96 113 61 53
Fax: 00 34 96 113 61 27
www.altransolutions.es
(Back face)
4