ClearWater Lights Erica 설치 매뉴얼 - 페이지 6
{카테고리_이름} ClearWater Lights Erica에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearWater Lights Erica 12 페이지. Kawasaki concours 1400 led light kit dimmable patent pending
ClearWater Lights Erica에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (8 페이지)
페이지 인쇄
Step 4: Wiring
Wire Routing:
• Be sure to route wires so that they cannot become tangled or caught
in either a suspension part or steering part. Check movement of both
steering and suspension before riding.
• It is sometimes helpful to follow existing wire routing.
Electrical:
• (1) Mount the power relay box in a safe location. Secure with a zip tie. (It
is a good idea to face the relay box with the wires coming out the bottom.)
• (2) Route all wiring so that there is no interference with moving parts.
• (3) Install the switch and dimmer in a convenient location as shown.
• (4) Switch - Crimp spade lugs to red, yellow and black wires from relay
box. Attach to corresponding tabs on switch. (See wiring diagram on Pg. 6)
• (5) Using Posi-tap, attach red (turn on wire) to a switched 12v wire.
• (6) Install connectors as shown in the wiring diagram on page 6.
• (7) Run the Red and Black power wires directly to the battery. The fuse
will protect the system in the event of a short.
High Beam/Horn Feature:
Locate your bike's High Beam headlight hot (+) and Horn's hot (+)
lead. This will make your lights go to full power when you turn on your
high beam or horn. Use a Posi-tap to connect one of the white wires
from the relay box to each of these wires. It does not matter which white
wire you use; both trigger the same way. If you do not want to use these
features, simply tuck the white wires away in a neat fashion. Reference
the photo below for the location of the headlight and horn wires.
Page 6
(Please consult owners manual for wiring diagram and color codes)
Page 5
Tap Reference (photo below):
Grey + Pink Stripe = Turn On Wire
Solid Grey = High Beam