EDI LMD602-R 운영 매뉴얼 - 페이지 10

{카테고리_이름} EDI LMD602-R에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EDI LMD602-R 15 페이지. Deflectometer inductive loop monitor

2.6.1 CURRENT FAULT

If a fault is detected, both the DET (Red) and FLT (Yellow) LEDs continuously emit a

sequence of flashes and the DEFLECTOMETER will display the letter "F". Each type of

fault is identified by a different flash sequence followed by a one second pause:

Flash Sequence

1 flash

2 flashes

3 flashes

If the fault condition is removed, the DET indicator and the channel output will return to

normal operation. The FLT indicator will continue to flash indicating that a fault had

previously occurred. This Previous Fault indication may be reset by momentarily pressing

the MODE and FREQ buttons simultaneously. See section 2.5.2.

Eberle Design Inc.

LMD602 and LMD604 Series

Operations Manual

Open Circuit Loop (or Inductance too high)

Shorted Circuit Loop (or inductance too low)

>25% Change in Inductance

Fault

Page 7