ClearWater Lights Erica 설치 매뉴얼 - 페이지 7
{카테고리_이름} ClearWater Lights Erica에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearWater Lights Erica 8 페이지. Kawasaki concours 1400 led light kit dimmable patent pending
ClearWater Lights Erica에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (12 페이지)
페이지 인쇄
Step 5: Wiring
Wiring Diagram for Krista/ Erica/ Sevina
Note: it does not matter
which white wire you
hook up to the horn or
high beam. Both trigger
the same way. If you do
not want the high beam or
horn option, just simply
tuck the unused white
wire(s) away.
Volume Control
POT
Glenda/ Darla Option:
Darla wires coming from harness
will be shorter than Krista/Erica/
Sevina wires.
Do Not Kink The
Grommet
To maintain the integrity
of the water sealing
grommet, do not kink,
deform or put pressure
on the grommet when
dressing the wires during
install of Clearwater Lights.
Horn Option:
use a posi-tap
to connect the
High Beam Option:
other white
use a posi-tap to con-
wire to the
nect one of the white
horn hot.
wires to the high
beam hot.
Do Not Kink The Grommet
Switch: Connect the Yellow wir e mar ked "Switch
Load" to the "load" terminal (Middle terminal) on the
switch. Connect the Red wire
switch" to the "supply" terminal (Opposite side of the
LED light terminal) on the switch. Connect the Black
wire marked "Ground" to the "earth" terminal (Under
the LED light terminal) on the switch.
Turn On Wire: use a posi-tap to
connect to low beam or switched
accessory hot. (Do not connect to
low beam wire if you have H4
headlight Bikes)
Posi-lock:
joins fuse to
relay box
Power: Connect
-
the red wire from
the fuse to the
hot (+) on the
battery. Connect
the black wire to
ground (-).
marked "12V+ to
Fuse
15A
+
4/9/2012
8/3/2018
Page 7