ClearWater Lights K1600GTL 예비 매뉴얼 - 페이지 7

{카테고리_이름} ClearWater Lights K1600GTL에 대한 예비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearWater Lights K1600GTL 8 페이지. Billie brake light

NOTE:

The auxiliary brake light is configured as an "always on" running

light at a reduced light level. When either the front or rear brake is

activated, it activates at 100% brightness. All flashing light modes are

deactivated below 5mph.

FACTORY DEFAULT RESET

To reset the CANopener to the factory settings, hold the left turn signal

switch and press the flash-to-pass button six times within six seconds. All

factory preset dimmer levels and modes will be selected. A successful

reset is indicated by five flashes of the Clearwater lights.

Page 7