Artforma LED Dual Color band 사용자 설명서 - 페이지 3

{카테고리_이름} Artforma LED Dual Color band에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artforma LED Dual Color band 4 페이지.

LED Dual Color remote control handling

Unpairing of the device:

In order to unpair the device, connect the mirror to the power supply ﬁrst.

Then, within 10 seconds, press the switch of the zone that you would like to switch off

ﬁve times on your remote control

Once you do that, the mirror will start flashing which means that the device assigned to

a chosen zone has been unpaired.

Main ON switch and main OFF switch:

The main ON switch serves to activate all zones.

The main OFF switch serves to deactivate all zones.

If you have only one paired product, it makes no difference whether you use zone-assi-

gned ON switches or main switches.

Zone-assigned ON switch:

Each zone-assigned ON switch is assigned to only one product.

The ON switch serves to activate and deactivate the zone that it is paired with.

Light colour change:

When you turn on the light with the main switch, you will change the colour and intensity

of the light for all zones.

If you would like to change the colour or intensity of only one of the zones, press the ON

switch of the given zone ﬁrst and then set the chosen colour and intensity.

Power supply:

Dimensions:

Control:

Range:

Maximum number of connected devices:

Warning! Batteries are not included. 2 AAA-type batteries should be bought separately.

Speciﬁcation of the remote control

AAA batteries (2x)

85 x 45 x 23 mm

Radio-controlled 2,4 Ghz

Up to 30 meters