Acoustics QI0120 설치 매뉴얼 - 페이지 8
{카테고리_이름} Acoustics QI0120에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustics QI0120 11 페이지.
페이지 인쇄
Connect cable tails to wall panel, speaker and power supply. Fix items in place using instructions
supplied with the speakers to ensure correct speaker installation.
Notes:
1.
Blanking plate required to cover break out box, requires a single hole to exit DC extension cable.
2.
Optional AUX input / TV sound requires a 25 x 50mm TOSLINK optical socket module (if using
optical cable), such as the 'Nexxia Digital Optical Module Insert' which is a 25x50mm slot in
module.
Connect speaker cables and fit speakers
Follow installation instructions supplied with speakers
Fit supplied double gang
back box into wall.
Screw keypad mounting
frame into back box
using screws provided.
Do not over tighten and
distort the frame.
E120 wall panel
Plug in all cables then push
wall panel into the frame
untill it clicks into place.
Remove
protective film
Mains
from Keypad.
socket
Once satisfied that the system
is all connected and working
correctly, insert x4 rubber
grommets into the small holes
around the plastic edge.
1 2
TV
Line-in
14
Removing the E120 wall panel
To remove the wall panel once it has been 'clicked' into the mounting frame follow these steps:
1.
Remove the small rubber grommets from each of the small holes around the outer frame, keep
safe.
2.
Use the small removal tool provided, or a similar tool 1.4mm diameter to insert into the hole, add
a little pressure into the frame whilst gently pulling the corresponding corner of the wall unit away
from the wall.
3.
When the unit comes away slightly, repeat the process for the next hole until all four have been
released.
4.
The E120 wall unit can now be removed away from the mounting frame and off the wall.
15