Altrex MiTower 안전 및 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} Altrex MiTower에 대한 안전 및 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altrex MiTower 20 페이지.

Index

1. Introduction

2. Type of scaffold

3. Safety instructions

4. Parts

5. Mounting instructions

6. Check before use

7. Assembling the MiTOWER / MiTOWER+

Assembling the MiTOWER STAIRS

9. Ballast

10. Moving the scaffold

11. Disassembly of the scaffold

12. Inspection, Care and Maintenance

13. Warranty conditions

14. Abbreviations and logos

1. Introduction

This manual applies exclusively to MiTOWER scaffold configurations (hereinafter: 'the scaffold') as described in this assembly

& user manual (hereinafter: 'the manual'). Prior to starting to assemble the scaffold, you should carefully read this manual. The

required scaffold should be assembled and used in accordance with this manual. All instructions in this manual have to be

followed strictly. Not following the instructions contained in this manual can easily result in serious accidents, serious injury or

death. Altrex cannot be held liable for any loss resulting from the assembly or use of an Altrex scaffold that is not in compliance

with the manual. The employer, supervisor and user are responsible for the correct use of the scaffold in accordance with this

manual and they must ensure that this manual is available at all times when work is being carried out using the scaffold.

Additional copies of the manual can be ordered from your Altrex dealer.

Local legislation and regulations might encompass measures in addition to those stated in this manual.

Altrex BV – Mindenstraat 7 – 8028PK Zwolle – The Netherlands - Tel.: +31 (0)38 455 7777

Internet: www.altrex.com

2. Type of scaffold

Standards