DJ SYSTEMS DJ-KONTROL 4 운영 매뉴얼 - 페이지 5

{카테고리_이름} DJ SYSTEMS DJ-KONTROL 4에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DJ SYSTEMS DJ-KONTROL 4 16 페이지.

ENGLISH

CONNECTIONS

Please follow the connection diagram below to connect the "DJ-KONTROL4":

 Use the supplied USB-cable to connect the controller via the USB-connector to your computer.

 Put the power switch on the rear of the unit to [USB 5V]. The unit will be powered via the USB cable that is

already connected to your computer.

Remark: in case the USB port of your computer doesn't deliver enough power to assure a stable use, you

can switch the button on the rear of the unit to [DC 5V] and use an external power adapter (DC 5V~1A) to

power the unit.

 Connect the [MASTER] cinch outputs or XLR outputs to your audio amplifier or powered speakers.

 Connect your stage monitors (if any) to the [BOOTH] output connectors.

 Connect your microphone (if any) to the mic input on the front panel of the controller.

 Connect your headphones to the headphones output on the front panel on the controller.

 You can connect up to 2 external sound sources to the unit via the [LINE INPUT] cinch connectors and use

the [INPUT LEVEL] rotary knob next to these connectors to adjust the level of the incoming signal.

See the chapter AUDIO CONFIGURATION to learn how to setup the audio routing in the software.

INSTALLING VIRTUALDJ

Installation on your computer:

Remark: The installation procedure below is explained for Windows. However, apart from some small

differences, the procedure under MAC OS is very similar.

Insert the CD-ROM in your computer: normally the installation should start automatically. If the installation

does not start automatically, browse the CD-ROM and double click the "install_virtualdj_le.exe" file

(install_virtualdj_le_.pkg for MAC users). File name can be slightly different)

If you don't have a dvd reader in your computer, register you license code and download the software on the

Virtual DJ website

Follow the instructions on the screen:

Click the "NEXT" button

Press the "INSTALL" button

Activating the software:

We recommend you to visit the Virtual DJ website (www.virtualdj.com) to register your software. Sign

in into your personal Virtual DJ account or create a new user account if you don't have one yet. Once

this is done, register your software (with the "license code" used to unlock the software).

JB SYSTEMS



Read and accept the agreement"



Press the "FINISH" button.

 !!! IMPORTANT !!! 

3/10

USER MANUAL



Choose "Typical" installation.

DJ-KONTROL 4