Edic Saturn 20DS3-Bk-SV 소유자/운영자 매뉴얼 - 페이지 5

{카테고리_이름} Edic Saturn 20DS3-Bk-SV에 대한 소유자/운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Edic Saturn 20DS3-Bk-SV 13 페이지. Low speed and dual speed floor machine

FINAL ASSEMBLY INSTRUCTIONS:

PLEASE CHECK THAT YOU HAVE RECEIVED 3

CARTONS. EACH CARTON IS MARKED, AS FOL-

LOWS:

1. BASE ASSEMBLY

2. HANDLE ASSEMBLY

3. BRUSH COVER ASSEMBLY

Open all three cartons and pull out the assemblies. The

base assembly in carton 1 is encased in a clam shell foam

assembly. pull off the top foam piece exposing the base

assembly inside. Reach and grab the base assembly and

pull it out using proper lifting techniques. The assembly

is very heavy (75lbs), ask for assistance if you cannot

do it by yourself. Check for damage- report damage to

freight carrier immediately. If no damage is present, pro-

ceed to the following final assembly procedure.

Tools required:

•

5/16" Allen wrench

•

Pair of adjustable wrenches or three open wrenches

(9/16", 7/8", and 13/16")

ASSEMBLY OF THE BRUSH COVER TO MOTOR

ASSEMBLY:

1. Place motor base assembly upside down on the floor

or on a work bench.

2. Pull out the brush cover from carton 3 and align the

four holes on the brush cover to the four holes on the

motor.

3. Use the four screws in the bag and mount the brush

cover. Hand-tighten the screws first and then use a

wrench to tighten them firmly. Use a CROSS pattern to

tighten the bolts as shown below.

4. Flip the motor base and place it on the floor right side

up after making sure the brush cover is

firmly attached.