AltRider GIVI MONOKEY 설치 지침 매뉴얼 - 페이지 3
{카테고리_이름} AltRider GIVI MONOKEY에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AltRider GIVI MONOKEY 6 페이지. Top case mounting system
페이지 인쇄2
!
You may have
to remove your
luggage rack
to install this
kit. Evaluate
before beginning
installation.
1
Assemble the lock tower as shown. Apply one drop of
thread locker (included) to the last couple of threads of the
two fasteners before inserting them.
3
After installing the tower and both posts, put your luggage
rack back on the bike (if you had to remove it to install).
//
Givi Monokey
Mount Kit
2
Assemble the posts as shown, in this order: M6 bolt-post-
rack-washer-nylock nut. No thread locker is necessary.
4
Clean the surface of Givi box (alcohol pad or similar recom-
mended). See the suggested guide above for placement
(optimal placement of bumpers differs by top box. or most
secure fit, apply where maximum contact occurs between
rack and top box). Bumpers can be applied on rack or top
box.
//
Installation Instructions
2