ArtFox Lightning FLEX BEAM V8 사용자 설명서 - 페이지 3

{카테고리_이름} ArtFox Lightning FLEX BEAM V8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ArtFox Lightning FLEX BEAM V8 13 페이지.

1. Safety Instructions

Please read the instructions carefully which includes important

information about the installation, operation and

maintenance.

• PLEASE keep this User Manual for future consultation. If you sell the fixture to another user,

make sure that they also receive this instruction booklet.

• PLEASE unpack and check carefully there is no transportation damage before using the fixture.

• It's important to ground the yellow/green conductor to earth in order to avoid electric shock.

• PLEASE disconnect main power before servicing and maintenance.

• Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is

higher than this.

• Unit's surface temperature may reach up to 85℃. DO NOT touch the housing bare-handed

during its operation.

• In the event of serious operating problem, stop using the fixture immediately. Never try to

repair the fixture by yourself. Repairs carried out by unskilled people can lead to damage or

malfunction. Please contact the nearest authorized technical assistance center. Always use the

same type spare parts.

• DO NOT connect the device to any dimmer pack.

• DO NOT touch any wire during operation and there might be a hazard of electric shock.

• To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or

moisture.

• The housing must be replaced if they are visibly damaged.

Warning

• To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or

moisture.

• DO NOT open the unit within five minutes after switching off.

• The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.