AKKTOL BT-607 사용자 설명서 - 페이지 8
{카테고리_이름} AKKTOL BT-607에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AKKTOL BT-607 14 페이지. Rivet nut tool
페이지 인쇄3. Fully depress the inner hex sleeve and thread the selected mandrel into the tool
by hand until it reaches the bottom. The mandrel does not need to be torqued.
Release the inner hex sleeve and allow it to fully reengage the hex part of the mandrel.
If the mandrel and inner hex sleeve do not initially align, slightly rotate the mandrel
until the inner sleeve clicks up and reengages.
4. Thread the matching nosepiece into the outer sleeve by hand; torquing
the nose piece is optional.
Ready to rivet
5
Check the video
on youtube