Cleaver CSCCO154 사용자 설명서 - 페이지 8
{카테고리_이름} Cleaver CSCCO154에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cleaver CSCCO154 12 페이지. Salumi cabinets
8. Changing Door Hinge
You can reverse the door swing on your cabinet to a left-hand hinge
configuration by following the steps.
STEP 1:
Using a thin spatula or butter knife, carefully remove the 5 plastic screw hole
caps ① and the cap of the door spindle ② on the top left hand corner of the
cabinet.
STEP 2:
Open the door to an angle and unscrew the hinge cover ③ from underneath
and remove. Carefully holding the door up, unscrew hinge screws ④ until
upper hinge ⑤ is loose enough to lift spindle from the door. Lift door
to remove from the lower hinge. Remove hinge screws and upper hinge
completely. Place screw caps ① into screwholes.
STEP 3:
Remove screws ⑥ on the lower hinge ⑦ and front vent cover.
STEP 4:
Install lower hinge on the opposite side ⑧ and refit screws into vent cover.
1
2
7
6
8
8
3
4
5