Cleaver The Bullock 사용자 설명서 - 페이지 10

{카테고리_이름} Cleaver The Bullock에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cleaver The Bullock 16 페이지. Dry ageing cabinets

7. Controlling Temperature

Important: By default, the LED displays the actual internal air temperature.

The temperature range for the CLEAVER Dry Ageing Cabinets is 1oC to 25oC.

The temperature settings are pre-set for 2oC.

Prolonged power failure may reset temperature to this setting. Short power

outages should not effect your temperature setting.

Please note that you will need to wait up to 12 hours before noticing the effects

of any temperature adjustment. This is due to the critical mass of the cabinet

and any/all meat held within a stocked CLEAVER Dry Ageing Cabinet.

Best results are achieved with minimal or infrequent adjustments to the

temperature settings.

While the thermostat will maintain the temperature inside the CLEAVER Dry

Ageing Cabinet within a +/- 2.5oC range, the thermal inertia of the cabinet, glass

and any meat inside is such that the actual temperature of any meat held in the

cabinet will only fluctuate by 0.5oC to 1oC.

Changing the Temperature:

Refer to image on page 9.

Press button ① once to set the temperature displayed on the

LED screen ④. Use the buttons ⑥ or ⑦ to increase or decrease