EDIC-mini EM Tiny16 Plus Series 운영 매뉴얼 - 페이지 13

{카테고리_이름} EDIC-mini EM Tiny16 Plus Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIC-mini EM Tiny16 Plus Series 17 페이지.

circular record.

15. Charging and Battery Maintenance

Note! Only for recorders with rechargeable battery (A and S-type models)

The battery starts charging automatically when you connect the recorder to the USB-

port of the computer. Full charging takes 3 hours (while charging LED is flashing

gradually with the interval of 5 seconds). With maximum charging LED will continuously

and smoothly change its brightness. The user can recharge the rechargeable battery via

power source with standard USB- output (5 V), during which the LED is permanently on

and one can assess the process according to the charging time only (3 hours).

Do not leave the rechargeable battery discharged. Recharge it at least once a month,

even if you don't use the recorder. Failure of the battery due to customer's fault is not

covered by the warranty.

Attention!

In firmware versions 1.14 for Tiny+ and 1.15 for Tiny16+ after memory filling, recorder

does not turn to Standby mode. That may lead to deep battery discharge and its

damage.

See your firmware version in EM PLUS program on the bottom line of the main menu

(for instance FW: 1.14).

In case of battery discharge, fulfill the following steps as soon as possible:

Clear the memory

Charge the battery

If you could not charge the battery, follow these steps:

Connect USB adapter to PC

Turn the switch to On position