EDIC-mini Tiny S+ E84 짧은 작동 설명서 - 페이지 6

{카테고리_이름} EDIC-mini Tiny S+ E84에 대한 짧은 작동 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIC-mini Tiny S+ E84 8 페이지.

Starting the record

The recorder switches to operation mode after the Switch has been shifted to ON. The

LED flashed five times and recording starts. After the transition to operation mode, the

green LED of the recorder makes two series of flashes.

The first series of LED flashes corresponds to battery charge level:

• 1 flash - charge level is 80-100%,

• 2 flashes - charge level is 20-80%,

• 3 flashes - low charge level, 0-20%;

The second series correspond to free memory card capacity:

• 1 flash states for 75-100%,

• 2 flashes – 50-75%,

• 3 flashes – 25-50%,

• 4 flashes – 1-25 %.

To stop the recording shift the Switch to OFF position. The LED will flash for 10-12

seconds and then the record stops.

When connecting the recorder to the PC please comply with strict order: first

connect USB adapter to the recorder, next connect adapter to the PC

port (disconnection order: first disconnect the USB adapter from the PC, then

recorder from the adapter). Red and green LEDs are briefly on the adapter.

Windows recognizes a new removable drive, which contains two files:

EMPlus.exe and emplus.srv. Run "EMPlus.exe" program.