EDIC-mini Tiny+ A77 운영 매뉴얼 - 페이지 5

{카테고리_이름} EDIC-mini Tiny+ A77에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIC-mini Tiny+ A77 20 페이지.
EDIC-mini Tiny+ A77에 대해서도 마찬가지입니다: 짧은 작동 설명서 (8 페이지)

Recording Duration

Recording duration depends on the type and

quality of the battery in use, its charge level, and

the record mode specified. Estimated duration for

different modes is specified in Appendix 1.

Installing and replacing batteries

Before starting, install the supplied battery. The

LED flashes 3 times and it will be on for about 40

sec. Now the recorder is ready to start operating.

When installing, always observe polarity (marking

on the recorder's case corresponds to the one on

the battery). Incorrect installation of battery may

lead to malfunction, which is not covered by the

warranty repair.

Supplying power for E71 and E72

For recorders with external power supply connect

a DC voltage source (3.7- 6 V) to contact 1 (minus)

and 2 (plus) of the stub coming from the Recorder

(Contact 1 is highlighted in color). In case of a Li-

Pol battery being a voltage source, battery charge

can be provided by the current of 100mA using

the connection of contacts 2 and 3 (if the adapter

is connected to the recorder and the computer's

USB).