Altronic A 1011 운영 지침 - 페이지 3
{카테고리_이름} Altronic A 1011에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Altronic A 1011 4 페이지. Two channel uhf remote control switch system
페이지 인쇄
Erasing Codes
There are two types of code deletion available.
Deletion of an Individual Programmed Code:
Press the P2 key for approximately 2 seconds then let go, the LED will come on.
Press the key on the radio control unit to be deleted.
Deletion of ALL Programmed Codes:
Press P2 until the LED comes on, approximately 8 seconds.
Speci cations
Power Supply
Frequency
Max Consumption
Decoding
No. of Max Codes
No. of Channels
No. of Outputs NO / NC
Max Switching Power
Operating Temperature
Working Distance
Relay Spec.
WARNING
• It is important the following manual should be followed for safety reasons. Incorrect
installation or improper use of the product can lead to severe damage to property
and/or persons.
• The packaging materials should be kept out of the reach of children since they are
potentially hazardous.
• Do not modify the device in any way.
• Disconnect the power supply prior to any intervention on the system.
• The status of the system has a direct in uence on the reliability and safety of the
device.
• Anything not expressly envisaged in these instructions is not permitted.
• Store the instructions for future reference.
9V - 24V AC / DC
433.92 MHz , 315 MHz
200 mA
Binary
140
2
2
0.5 A / 120 VA
-20/ + 50
40 - 50 meters
12A 14V DC or 7A 120V AC