EDIC-mini Tiny+ B73 운영 매뉴얼 - 페이지 6

{카테고리_이름} EDIC-mini Tiny+ B73에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIC-mini Tiny+ B73 20 페이지.
EDIC-mini Tiny+ B73에 대해서도 마찬가지입니다: 짧은 작동 설명서 (8 페이지)

Start and Stop Recording

To start recording, set the Switch to «On». The

LED flashes five times, and the recorder starts

recording. During recording, the LED is flashing,

the number of flashes indicating battery charge

level (1 flash indicates charge of 80-100%, 2

flashes - 20-80%, 3 flashes indicate charge of

0-20%, which means the battery must be replaced

or rechargeable battery charged) and free memory

capacity: 1 flash states for 100-76%, 2 flashes -

75-51% , 3 flashes - 50-26%, 4 flashes - 25 -1%.

The interval between the first and second series of

flashes is approximately 4 seconds, and between

the second and first is about 8 seconds.

Note that in battery recorders the first series of

flashes shows battery charge at the time the

recorder has been activated and is not controlled

during recording.

To stop recording, shift the Switch to «Off» position.

The LED flashes once for 10-12 seconds and the

recorder stops recording.