Altronics Micron T 2163 빠른 시작 매뉴얼

{카테고리_이름} Altronics Micron T 2163에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altronics Micron T 2163 4 페이지. Soldering iron and accessories kit

페이지 인쇄

INTRODUCTION

Thank you for purchasing the T 2163 Soldering Kit – a great solution for your soldering equipment needs!

We believe that you will be more than satisfied with the many features and the versatility of the

numerous accessories contained in your new soldering kit. Applications include: Radio controls, hobbies

and crafts, small electrical parts, PCBs, wires.

Before using the soldering iron inside, please carefully read the instruction manual and observe all

warnings and instructions for safe operation. Failure to follow all instructions here listed may result in

electric shock, fire, or serious injury. Retain the instructions for future reference.

PRODUCT DESCRIPTION

The unit has a slender soldering iron pencil design with a comfortable rubber grip that prevents operator

fatigue. The soldering iron is equivalent to T 2445 and is connected to the mains power via a

burn-resistant approved power cord. These instructions and the T 2445 manual are interchangeable.

WARNING:

1. Operate this iron in a well ventilated area.

2. Do not tap the tip heavily in attempting to remove solder build-up.

3. Do not use it for non-soldering applications.

4. Do not disassemble the iron.

5. Only use recommended replacement parts e.g. tips.

6. Please turn off the power when you have finished using it.

7. This tool must be placed on its stand when not in use.

8. Do not immerse in water.

9. Before cleaning the unit, always remove the power lead plug from the socket. Unscrewing the

housing is not permitted.

10. This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

11. Children should be supervised to ensure that they do not play with the appliance. Failure to observe

this safety regulation could result in a risk to life and limb. The manufacturer or supplier shall not be

liable for damage resulting from misuse of the unit or unauthorised alterations.

CAUTION:

DO NOT WORK ON LIVE CIRCUITS

•

Before working on any mains powered equipment, make sure that it is turned off, and the mains plug

is removed from the power point. You must not undertake work on live parts.

DO NOT USE IF DAMAGED

•

If the power lead becomes damaged or seems faulty, discontinue use immediately. Seek the

assistance of an authorised service technician at the place of purchase to fix anything damaged.

HIGH TEMPERATURES

•

Soldering irons operate at high temperatures and can easily burn the skin and/or objects. Do not

touch the tip and heater at any time and keep it a safe distance from inflammable materials while the

unit is on, or while cooling after switching off. Please allow a sufficient time for it to cool before

changing tips.

Micron T 2163 Soldering Iron and Accessories Kit

1 |

P a g e