dji CP.MA.00000660.01 사용자 설명서 - 페이지 11

{카테고리_이름} dji CP.MA.00000660.01에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji CP.MA.00000660.01 20 페이지.
dji CP.MA.00000660.01에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지)

페이지 인쇄

DJI RC User Manual

Normal Mode: The aircraft utilizes GNSS and the Vision Systems and Infrared Sensing System to locate

and stabilize itself. When the GNSS signal is strong, the aircraft uses GNSS to locate and stabilize itself.

When the GNSS is weak but the lighting and other environment conditions are sufficient, the aircraft

uses the vision systems to locate and stabilize itself.

Sport Mode: In Sport Mode, the aircraft uses GNSS for positioning and the aircraft responses are

optimized for agility and speed making it more responsive to control stick movements. Note that

obstacle sensing is disabled in Sport Mode.

Cine Mode: Cine mode is based on Normal mode and the flight speed is limited, making the aircraft

more stable during shooting.

Refer to the flight modes section in the aircraft's user manual for more information about flight mode

features for different aircraft types.

Flight Pause/RTH Button

Press once to make the aircraft brake and hover in place. Press and hold the button until the remote

controller beeps to start RTH, the aircraft will return to the last recorded Home Point. Press this button

again to cancel RTH and to regain control of the aircraft.

Optimal Transmission Zone

The signal between the aircraft and the remote controller is most reliable when the remote controller is

positioned towards the aircraft as depicted below.

DO NOT use other wireless devices operating at the same frequency as the remote controller.

Otherwise, the remote controller will experience interference.

A prompt will be displayed in DJI Fly if the transmission signal is weak during flight. Adjust the remote

controller orientation to make sure that the aircraft is in the optimal transmission range.