Altronics PowerQuest 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Altronics PowerQuest에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altronics PowerQuest 6 페이지. Touch screen control system
Altronics PowerQuest에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지)

페이지 인쇄

Auto Enable:

Check to enable. Allows switch channel to automatically turn on and off other selected channels when

activated/deactivated.

Auto Switch Delay:

Time in seconds selected circuit is delayed from turning on if it is Auto Enabled from another channel.

Trig Enable:

External control to turn channel on or off. Requires wired connection to IGN (ignition), Trig 1 or Trig 2 terminals on module.

Save:

Saves changes and returns to previous Menu.

Lock Screen:

1411 S. Roselle Rd. Schaumburg, IL 60193

www.AltronicsInc.com

Pump and back to 100º to turn on again)

Master Code:

On the back of Module (not the touch screen)

there is a tag with the systems Master 4 digit program code and a

Temporary User Code. You can use the Master code to program

your User code. The Master code can always be used to reset

User code.

Reset User Code:

Code.

1) User code cannot be Master Code or 1234.

2) Key in Master Code and press ENTER

3) Use Back arrow to delete Master Code from window.

4) Key in number USER CODE XXXX and press ENTER

5) Press Enter Again

Now User Code is set.

Unlock Screen:

Key in User code and press ENTER

SLEEP:

Press Sleep to force sleep mode.

Phone (847) 923-0002 Fax (847) 923-0004

Use following sequence to program User