EDIFIER Extreme Connect MP260 사용자 설명서 - 페이지 8

{카테고리_이름} EDIFIER Extreme Connect MP260에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIFIER Extreme Connect MP260 10 페이지. Portable multimedia speaker

USB audio Instruction for PC Users (Windows XP)

Step 1:

Step 2:

Step 3:

Click "Sounds, Speech, and Audio Devices" Ú "Sounds, and Audio Devices"

Page 10

Operational guide

Ú Press

until the top indicator is green.

Ú Connect the 3.5mm-3.5mm Audio cable to the "LINE IN" port.

Ú Play the connected device and adjust the volume to a desired level.

*************************************************************************************************************************************

Page 11

Power output:

Signal to noise ratio:

Frequency response:

Input sensitivity:

Adjustment:

Input type:

Micro SD card specification:

MAX capacity:

Disk Format:

Connect the EDIFIER Extreme to your PC with the USB cable.

Step 4: Set the Hardware: "EDIFIER Extreme Connect", then click "OK".

Step 5: Open audio medium and play. Adjust the volume to a desired level.

green

RMS 2W×2 (THD+N=10%, f

≥85 dBA

190Hz~18KHz (@+/-6db)

500mV ± 50mV (THD+N=1%)

Buttons on the top of speaker

Bluetooth/Micro SD/USB audio/AUX (3.5mm stereo)

32GB

FAT32

Click "Start" Ú "Setting" Ú"Control Panel"

=1KHz)