dji MATRICE 30 T Dock Version 사용자 설명서 - 페이지 2

{카테고리_이름} dji MATRICE 30 T Dock Version에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji MATRICE 30 T Dock Version 6 페이지.

Introduction

DJI

MATRICE

30T Dock Version aircraft can be linked to DJI Dock. With DJI FlightHub 2, it

can be used to perform automated operations remotely.

In the Box

Aircraft* ×1

* The aircraft comes with a microSD Card inserted.

Preparing the Aircraft

• Make sure the propellers are securely mounted and not damaged or deformed and

that there are no foreign objects in or on the motors or propellers.

• Make sure the lenses of the vision systems, gimbal cameras, FPV camera, glass of

infrared sensors, and auxiliary lights are clean and not blocked in any way, and that

the protective stickers are removed.

• Make sure the waterproof rubber port covers are correctly in place and securely sealed.

1. Unfold the frame arms on both sides in the same way. Make sure the frame arm folding

buttons pop out to ensure that the frame arms are locked firmly.

2. Make sure the gimbal camera is facing forward.

3. Insert two TB30 batteries (not included). Make sure the battery release toggles are in the

same position as shown in the diagram.

4. Press and then press and hold the power button to power on/off the aircraft. The power

indicator glows solid green after the aircraft is powered on.

Screws and Tools ×1

1671 Propeller ×2

High

Low

1671 Propeller ×2

CCW