dji MATRICE 300 RTK 유지 관리 매뉴얼 - 페이지 14

{카테고리_이름} dji MATRICE 300 RTK에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji MATRICE 300 RTK 19 페이지. Dual gimbal connector
dji MATRICE 300 RTK에 대해서도 마찬가지입니다: 제품 정보 (17 페이지), 유지 관리 매뉴얼 (19 페이지), 사용자 설명서 (15 페이지), 빠른 시작 매뉴얼 (10 페이지), 제품 정보 (10 페이지)

페이지 인쇄

MATRICE 300 RTK Maintenance Manual

1. Ensure that the dampeners are not damaged,

loose, or aged.

Gimbal

2. The gimbal connector should rotate smoothly.

Damping Plate

The surface must be clean without any foreign

and Gimbal

matter or dirt.

Damper

3. Ensure that the screws connecting the

damping plate and aircraft body are secure.

Infrared

1. Ensure that all lenses and ultrasonic module

Sensing,

surfaces have no dirt or cracks.

Vision System

2. Ensure that lenses are not loose and have no

and FPV

cracks.

Lenses,

3. Ensure that the upper and bottom beacons are

Ultrasonic

not loose and cracked. Also, they should be

Module, and

located on the aircraft body properly.

Beacons

Battery and Charger

Battery Maintenance Conditions

Maintenance is required when any of the events below occur.

1. Every 50 cycles.

2. The battery is idle for more than three months.

3. There is a maintenance prompt in the app.

Checklist for Maintenance

1. Charge and discharge the battery as per instructions.