dji Matrice 600 Pro 빠른 참조 매뉴얼 - 페이지 2

{카테고리_이름} dji Matrice 600 Pro에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Matrice 600 Pro 9 페이지.
dji Matrice 600 Pro에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (16 페이지)

페이지 인쇄

IN LAB

Environment Checks

1. Determine location and duration of flight

2. Determine altitude and overlap settings of flight

3. Assess weather for flight location –

4. Check TFRs and NOTAMs.

5. File LAANC (if needed)

Battery Checks

6. Ensure M600 battery sets are fully charged

a. Minimum one set per flight, plus ≥ 1 backup set

NOTE: DO NOT Mix Battery Sets

7. Ensure PPK batteries are fully charged

a. 2 blue LiPOs needed

b. Minimum charge of 11.9 volts (fully charged: 12.6 v), with no more than 0.2

voltage difference between cells

8. Ensure M600 iPad battery is charged to ≥ 60%

9. Ensure both 'Master' and 'Assistant' controllers are charged to ≥ 75%

SD Card Checks

10. Sony A6000 SD Card

a. Delete all files

11. PPK MicroSD Card

a. Open CONFIG.html file and

ensure the following settings:

Trigger Mode: Overlap

Overlap: 80%

Altitude: *Set to flight height*

Focal Length: 21mm

Height: 15.52mm

Length: 23.28mm

Trigger Control: Auto-Start

Camera Offsets:

o X: 0.12m

o Y: -0.121m

o Z: 0.256m

Atlas Global GNSS: Disabled

Did you review settings?

b. Right click and save as CONFIG.html

Overwrite existing file in SD Card

Pre-Departure Prep and Packing List

IF POOR CONDITIONS, DO NOT FLY

Yes

(iPad PW:

1-0-1-5-7-5)

Firmware version: 1.7.21 – 07/19/21