Arthur Grillo DPC200-MOD 설치 및 운영 매뉴얼 - 페이지 6
{카테고리_이름} Arthur Grillo DPC200-MOD에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arthur Grillo DPC200-MOD 18 페이지. Differential pressure / volume flow controller
페이지 인쇄
INSTALLATION
3.
Installation
The differential pressure controller DPC200-MOD is designed for wall mounting.
•
The mounting surface must be solid enough and vibration-free.
•
The environment has to fulfill the ambient climatic conditions as given in the technical
data.
CAUTION
NOTICE
3.1 Dimensions
All dimensions in mm.
3.2 Wall mounting
1.
Hold the DPC200-MOD against the wall. Mark the mounting holes.
2.
Drill mounting holes for properly sized screws.
3.
Put the screws through the housing mounting holes.
4.
Tighten screws.
6
Doc.-no.: DPC200-MOD_02_EN
Material damage
Read the manual carefully before installation and operation
Only experienced stuff may connect the device and bring it into
operation.
•
The device is position depended.
•
The DPC200-MOD must be mounted vertically.
Issue: 08/2019