EDIFIER TO-U7 Pro 매뉴얼

{카테고리_이름} EDIFIER TO-U7 Pro에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIFIER TO-U7 Pro 7 페이지. True wireless noise cancellation in-ear headphones

페이지 인쇄

True Wire le ss N oise Ca nce ll at ion In- Ear H eadp ho nes

EN 1. Power ON/OFF

1.Power ON when the case is opened.

2.Power OFF when placed in the case and the case is closed.

Note:

If there is no Bluetooth connection for 10 minutes after power on, the

earbuds will turn off automatically; if there is no Bluetooth connection in

noise cancellation or ambient sound mode, the earbuds will turn off

automatically after 2 hours.

2. Pairing

1.Earbuds placed in the case and keep the case open.

2.Press and hold the button on the case for about 3s. LEDs will be lit

one by one in a clockwise direction and then display circularly.

3.Select "EDIFIER TO-U7 Pro" in your device setting to connect. LEDs

will blink once and then turn off when successfully.

1st Pairing

1.Earbuds placed in the case and keep the case open. LEDs will be lit

one by one in a clockwise direction and then display circularly.

2.Select "EDIFIER TO-U7 Pro" in your device setting to connect. LEDs

will blink once and then turn off when successfully.

Note:

For subsequent use, the earbuds will automatically connect to the device

used last time.

3. Reset

1.Earbuds placed in the case and keep the case open.

2.Press the button on the case 3 times to re-enter left & right connection

and clear pairing records. LEDs will blink twice and then turn off when

successfully.Then, LEDs will be lit one by one in a clockwise direction

and display circularly.

3.Select "EDIFIER TO-U7 Pro" in your device setting to connect. LEDs

will blink once and then turn off when successfully.

4. Charging

5. Controls

Left Touch Panel

Note:

1.Default sound control:both earbuds-noise cancellation & ambient sound

& noise cancellation off; single earbud-noise cancellation off & ambient

sound.

2.Images are for illustrative purposes only and may differ from the

actual product.

3.Download Edifier Connect App for more customizable control settings.

For more information, please visit our website:

@Ediﬁerglobal

Model: EDF280001

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

Printed in China

NOTICE:

For the need of technical improvement and system upgrade,

information contained herein may be subject to change from time

to time without prior notice.

Products of EDIFIER will be customized for different applications.

Pictures and illustrations shown on this manual may be slightly

different from actual product. If any difference is found, the actual

product prevails.

TO -U7 Pro

Manual

Indicator

Charging case

1. Please connect the case to power source

with the included Type-C charging cable for

charging.

2. During charging, LEDs will be lit one by one,

and then turn off gradually to the actual

power level after all LEDs are lit; LEDs will

be off after fully charged.

Note:

Please do not charge the earbuds when there

is sweat or other liquids inside the charging

port, which may damage the earbuds.

Input: 5V

www.edifier.com

@Ediﬁer_Global

Button

200mA(Earbuds)

1A(Charging case)

Right Touch Panel

@Ediﬁer_Global