dji PHANTOM 3 PROFESSIONAL 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} dji PHANTOM 3 PROFESSIONAL에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji PHANTOM 3 PROFESSIONAL 10 페이지. Intelligent flight battery heater
dji PHANTOM 3 PROFESSIONAL에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (3 페이지), 빠른 시작 매뉴얼 (4 페이지), 고급 매뉴얼 (16 페이지)

페이지 인쇄

5. Preparing the Remote Controller

Tilt the Mobile Device Holder to the desired position, and

then adjust the antennas as shown. The strength of the

Remote Controller's signal will fluctuate depending on the

positions of the antennas.

Strong

The transmission signal between the aircraft and

Remote Controller will be strongest within the

range illustrated here. If the signal is weak, adjust

the positions of the antennas and fly the aircraft

closer to achieve optimal signal performance.

To avoid signal interference, do not use other 2.4GHz devices when flying.

●

6. Flight Controls

Here are the default flight controls (Mode 2). The left stick controls altitude and rotation, while the right stick controls the

forward, backward, left or right movements. The gimbal dial controls the camera's tilt.

Left Stick

You can customize or change these controls through the DJI GO app.

●

Weak

Right Stick

Press the button on the side of the Mobile

Device Holder to release the clamp.

Place your mobile device into the clamp and

adjust it so that the mobile device is held

securely in place.

Connect your mobile device to the Remote

Controller with a USB cable. Plug one end of

the cable into your mobile device, and the

other end into the USB port on the back of

the Remote Controller.

Gimbal Dial