dji Phantom 4 RTK 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} dji Phantom 4 RTK에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Phantom 4 RTK 10 페이지. Remote controller
dji Phantom 4 RTK에 대해서도 마찬가지입니다: 면책 조항 및 안전 매뉴얼 (19 페이지), 설정 매뉴얼 (7 페이지), 자주 묻는 질문 매뉴얼 (17 페이지)
페이지 인쇄
Black propeller
rings go on motors
with black dots.
Check that the propellers are
●
secure before each flight.
7. Flight
Ready to Go (RTK)
Takeoff
Combination Stick Command
to start/stop the motors
Spinning propellers can be dangerous. Stay away from spinning propellers and motors. DO NOT start the
●
motors in confined spaces or when there are people nearby.
Always keep your hands on the remote controller when the motors are spinning.
●
Stopping motors mid-flight: Perform the CSC to stop the motors. This feature is disabled by default. It can
●
be enabled in the app. Only stop motors mid-flight in emergency situations when doing so can reduce the
risk of damage or injury.
It is important to understand basic flight guidelines, for the safety of both you and those around you. Do not
forget to read the Disclaimer and Safety Guidelines.
* RTK positioning is recommended. Go to DJI GS RTK > Fly >
for receiving RTK signals.
Silver propeller
rings go on motors
without black dots.
Before taking off, make sure the Aircraft Status Bar in the DJI GS RTK
app indicates Ready to Go (RTK)* or Ready to Go (GNSS).
OR
Left stick (in Mode 2)
up slowly to take off
> RTK to enable RTK module and select a method
Press the propeller down onto the
mounting plate and rotate in the
lock direction
until secure.
Landing
Left stick down slowly
until you touch the
ground
Hold for 3 seconds to
stop the motors