dji AGRAS MG-1S 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} dji AGRAS MG-1S에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji AGRAS MG-1S 20 페이지. Spreading systems
dji AGRAS MG-1S에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

페이지 인쇄

AGRAS MG-1S

Quick Start Guide

Mounting the Sprinklers

1. Mount the sprinklers with white hoses under motors M3 and M8. Mount the sprinklers with black hoses under

motors M4 and M7. Mount each of the four sprinklers using three M3×5 screws.

2. Prepare hose clamps B and T3×8 screws to fix the hoses to the frame arms.

Open hose clamps B to an appropriate angle gently. DO NOT over-stretch the clamps to avoid damage.

Clip the clamps around the hoses at the position that needs to be fixed. Ensure that the flat side of the

clamp is close to the bottom of the frame arm junction and tighten the T3×8 screw.

3. Insert the hoses on both sides into the clips on the landing gear.

4. Mount the fender to the right landing gear leg to avoid spills when pouring liquids. Handle with care to avoid

damage to the fender.