dji AGRAS MG-1S RTK 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} dji AGRAS MG-1S RTK에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji AGRAS MG-1S RTK 20 페이지.

Return-to-Home

It is important to take off with a strong GPS signal to ensure that the Home Point is recorded by the aircraft.

The aircraft will automatically return to the Home Point in the following cases.

Smart RTH: You press the RTH button.

Failsafe RTH*: Remote controller signal is lost.

Always set an appropriate RTH altitude that goes above nearby buildings before takeoff. When the aircraft is

returning to the Home Point, you should guide it with the control sticks.

* The Failsafe RTH must be enabled in the DJI MG app. If not enabled, the aircraft will hover in place when remote controller

signal is lost.

1. Pesticides are poisonous and pose serious risks to human safety. Please use them in strict accordance with

their specifications.

2. Residue on the equipment caused by splashes or spills when pouring and mixing the pesticide can irritate your

skin. Be sure to clean the equipment after mixing.

3. Use clean water to mix the pesticide to avoid blocking the strainer. Clear any blockages before using the

equipment.

4. Wear protective clothing to prevent direct body contact with the pesticide. Always rinse your hands and skin

after handling pesticides. Clean the aircraft and remote controller after applying the pesticide.

5. Effective use of pesticides relies on pesticide density, spray rate, spray distance, aircraft speed, wind speed

and wind direction. Consider all factors when using pesticides, but NEVER compromise the safety of people,

animals and the environment in doing so.

6. DO NOT contaminate rivers and sources of drinking water.

7. Avoid the use of powder pesticides as much as possible or else they may reduce the service life of the spraying

system.

It is important to understand basic flight guidelines, for the safety of both you and those

around you. Do not forget to read the Disclaimer and Safety Guidelines.

AGRAS MG-1S

Return-to-Home

Quick Start Guide