dji Inspire 1 Pro 사용자 설명서 - 페이지 10

{카테고리_이름} dji Inspire 1 Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Inspire 1 Pro 10 페이지.
dji Inspire 1 Pro에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (11 페이지)

페이지 인쇄

INSPIRE 1 PRO User Manual

There are two options for Dynamic Home Point.

1. Set the aircraft current coordinate as the new Home Point.

2. Set the remote controller's coordinate as the new Home Point.

Setting Up Dynamic Home Point

Follow the steps below to setup Dynamic Home Point:

1. Connect to the mobile device and launch the DJI GO app and go to the "Camera" page.

2. Tap" "and select" ", to reset the remote controller's coordinates as the new Home Point.

3. Tap" "and select"

", to reset the aircraft's coordinates as the new Home Point.

4. The aircraft status indicator blinks green to show Home Point is set successfully.

Vision Positioning System

DJI Vision Positioning is a positioning system that uses ultrasonic and image data to help the aircraft

identify its current position. With the help of Vision Positioning, your Inspire 1 Pro can hover in place

more precisely and fly indoors or in other environments where there is no GPS signal available. The main

components of DJI Vision Positioning are located on the bottom of your Inspire 1 Pro, including [1]two

sonar sensors and[2]one monocular camera.

[2]

[1]

Using Vision Positioning

Vision Positioning is activated automatically when the Inspire 1 Pro is powered on. No manual action is

required. Vision Positioning is typically used in the indoor environment where no GPS is available. By

using the sensors on the Vision Positioning system, Inspire 1 Pro can perform precision hovering even

when no GPS is available.