EDIFIER EDF200113 매뉴얼

{카테고리_이름} EDIFIER EDF200113에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIFIER EDF200113 7 페이지. True wireless noise cancellation in-ear headphones

페이지 인쇄

True W i reless Noi se Ca nce ll at io n In - Ea r Headp h o n e s

EN 1. Power ON/OFF

Indicator

1. Power ON when the case is opened.

2. Power OFF when placed in the case and the case is closed.

Note:

If there is no Bluetooth connection for 2 hours after powered on, the

earbuds will power off automatically.

2. Pairing

Pairing for the first time

1. Earbuds placed in the case and keep the case open. LEDs will be

lit one by one from left to right in a circulating pattern.

2. Select "EDIFIER NeoBuds Pro 2" in Bluetooth device setting to

connect. LEDs will blink twice and then turn off when successfully.

Pairing for new device

1. Earbuds placed in the case and keep the case open.

2. Press and hold the button on the case for about 3s. LEDs will be

lit one by one from left to right in a circulating pattern.

3. Select "EDIFIER NeoBuds Pro 2" in Bluetooth device setting to

connect. LEDs will blink twice and then turn off when successfully.

Fast Pair(Phone with Android 6.0+)

Open the charging case and keep the case next to the phone(make

sure the phone is unlocked and Bluetooth® is on), and tap the pairing

notification when the pop-up window appears to connect effortlessly.

Note:

For subsequent use, the earbuds will automatically connect to the device

used last time.

3. Reset

1. Earbuds placed in the case and keep the case open.

2. Press the button on the case 3 times to re-enter left & right

connection and clear pairing records. LEDs will be lit one by one

from sides to center in a circulating pattern and then will blink

twice when successfully.

3. Select "EDIFIER NeoBuds Pro 2" in Bluetooth device setting to

connect. LEDs will be lit one by one from left to right in a circulating

pattern, then will blink twice and turn off when successfully.

4. Auto-pause music

Remove one or both earbuds while listening to music, the music will

automatically pause; to resume the music, insert the earbud(s) back

in the ear(s). This function can be disabled or configured in "wearing

detection" settings via Edifier Connect App.

5. Charging

Indicator

6. Controls

Left Tap Panel

Note:

1. Default sound control: high noise cancellation / ambient sound.

2. Default sound modes: music mode / game mode / spatial audio.

3. lmages are for illustrative purposes only and may differ from the

actual product.

4. Download Edifier Connect App for more customizable control

settings.

For more information, please visit our website:

@Edifierglobal

Model: EDF200113

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

Printed in China

NOTICE:

For the need of technical improvement and system upgrade,

information contained herein may be subject to change from time

to time without prior notice.

Products of EDIFIER will be customized for different applications.

Pictures and illustrations shown on this manual may be slightly

different from actual product. If any difference is found, the actual

product prevails.

Manual

Earbuds

Place earbuds in the charging case and keep the

case closed.

Charging case

1. Please connect the case to power source with the

included Type-C charging cable for charging.

2. LEDs are steady lit when charging and off when

fully charged.

Note:

Please do not charge the earbuds when there is

sweat or other liquids inside the charging port,

which may damage the earbuds.

Input: 5V

200mA(Earbuds)

1A(Charging case)

www.edifier.com

@Edifier_Global

Indicator

Right Tap Panel

@Edifier_Global