FITKIT FT098 사용자 설명서 - 페이지 6

{카테고리_이름} FITKIT FT098에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FITKIT FT098 14 페이지.

3. Installation Instructions

When installing, simply fix all screws first, then tighten the screws when the installation of

frame is done.

1. Put the machine flat on the ground and stand the columns and flip the console with the direction

shown in the picture below.

2. Remove the preinstalled screws M8*22. Use 5# hexagon wrench and screw M6*12 to lock and

fix the base(two screws for each side). Then install the screw M8*22 back.

M8*22

M6*12

3. Hold left& right columns, use 6# hexagon wrench and screw M8*25 to lock the console frame

on the columns(Tighten all screws in above steps, and please notice not to clamp the cable by

column).

Screw M8*25