FITKIT FT100S 사용자 설명서 - 페이지 8

{카테고리_이름} FITKIT FT100S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FITKIT FT100S 13 페이지.

5) Console instructions

Start-up

Normally start after 5 seconds of countdown.

Amount of programs

3 manual programs, 12 automatic programs, 1 FAT program.

Safety lock function

Disconnect the security lock, "E7" shows on the screen. The treadmill stops immediately, and a Di

alarm sound is let out. Put the safety key back, all the data will be cleared in 2 seconds.

Key function

Start button, Stop button:

When the power is on, press the start button to start the treadmill. And press the stop button to stop

the treadmill when the unit is in running mode.

Program key

In standby mode, pressing this key can cycle the options from manual mode to P1 to P12 automatic

programs. Manual mode is the system defaulting running mode.

Mode key

In standby mode, press this key to cycle the options of 3 different countdown running mode: time

countdown running mode, distance countdown running mode and calorie countdown running mode.

Use speed + - to adjust the set value.

Speed + - key:

Use these keys to adjust the speed of the treadmill or to adjust the set value.

Speed shortcut key:

Use these keys to change the speed directly in running mode.

Media control keys

Previous, Next, Volume up, Volume down. Press these keys to adjust the media when insert audio

devices.

Display Function

Speed Display

Display the current running speed value.

Time Display

Display the time of manual mode and the countdown time under automatic modes and programs.

Distance display

Display cumulative distance under manual mode and programs. Display the distance countdown in

automatic mode.

Calorie display

Display cumulative calorie under manual mode and programs. Display the calorie countdown in

automatic mode.

Heart rate display

Heart rate signal will be detected after holding the heart rate sensor on handrails for a short time.

This data is for reference only, it cannot be considered as medical data.

Automatic program

Each program is divided into 10 segments, and the running time of each segment of the program

is evenly distributed. Following is a form of time distribution of 12 programs.