FITKIT FT300M 사용자 설명서 - 페이지 7

{카테고리_이름} FITKIT FT300M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FITKIT FT300M 16 페이지.

3. Installation Instructions

When installing, simple fix all screws first, then tighten screws when the installation of frame is

done.

Step 1. Put the machine on the flat ground, cut the nylon cable on the base and set the upright

column and console up with the direction shown as below.

Base

Frame

Step 2. Use 5# inner hexagon wrench and screw M8*42 to lock the base, and then use the 6# inner

hexagon wrench to fix the upright column to the base with screw M8*25.

M8*25

M8*42

Step 3. Hold left& right columns, use 6# inner hexagon wrench to lock the console frame on the

columns with screw M8*25.

Screw M8*25