AKKU SYS a-TroniX 2kVA-EBP 사용자 설명서 - 페이지 10

{카테고리_이름} AKKU SYS a-TroniX 2kVA-EBP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AKKU SYS a-TroniX 2kVA-EBP 12 페이지. Extended battery pack 24v, 48v, 72v

User Manual

Extended Battery Pack 1kVA, 2kVA, 3kVA

Testing New Batteries

Plug the UPS into a power outlet for 48 hours to charge the batteries.

■

Start up the UPS by pressing the start-up combination button.

■

Press the battery test combination button to activate the battery test. The UPS starts

■

a battery test if the batteries are fully charged the UPS in normal mode with no active

alarms and the bypass voltage is acceptable.

During the battery test, the UPS transfers to Battery mode and discharges the batteries

for 10 seconds. The LED indicators of the front panel stop cycling when the test is

completed.

Recycling used battery

Do not dispose of batteries in a fire. Batteries may explode. Proper disposal

■

of batteries is required. Refer to your local codes for disposal requirements.

Do not open or mutilate batteries. Released electrolyte is harmful to the skin

■

and eyes. It may be toxic.

Do not discard waste electrical or electronic equipment (WEEE) in the trash.

■

Do not discard the UPS or the UPS batteries in the trash.

This product contains sealed, lead-acid batteries and must be disposed of

properly.

For more information, contact us on the hotline +49 4101/376760,

Refer to your local codes for disposal requirements.

Page 10

or use the QR-code:

09/2021