3idee hp-z32 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} 3idee hp-z32에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3idee hp-z32 7 페이지. Vesa adapter

Assembly Instruction

Step 1

Place your screen in a safe, soft place so that your screen does not get damaged.

Remove the base of your monitor if it is already attached. Simply use the click mechanism on the

monitor mount and pull the foot upwards.

Step 2

Carefully remove the round cover as shown using a slotted

screwdriver. (Figure 1)

Step 3

After you have removed the foot, the click mechanism must

be removed. To do this, loosen the two screws as shown and

pull the part away upwards.

(Figure 2)

Step 4

Now plug the 3idee VESA adapter onto the monitor as

shown.

Important! Note the correct orientation (top and bottom)

of the VESA adapter. The straight line on the VESA adapter,

which is located below the screw holes, should point towards

the bottom. (Figure 3)

Assembly

instructions

Figure 1

Figure 2

Figure 3