dji Matrice 600 Pro 사용자 설명서 - 페이지 7

{카테고리_이름} dji Matrice 600 Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Matrice 600 Pro 16 페이지.
dji Matrice 600 Pro에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 빠른 참조 매뉴얼 (9 페이지)

페이지 인쇄

1. Using the Batteries

Installation

Mounting the Landing Gear

1. Ensure the screw on the landing gear leg is pointing in the same direction as the gap next to the

knob on the landing skid. Insert both landing gear legs into a corresponding landing skid, rotate

the landing gear leg until it is fully seated into the landing skid, and then secure it in place by

tightening the knob.

2. Ensure the hook on the landing gear leg is facing toward the outside of the aircraft, then attach

it to the connector on the aircraft body. Rotate the landing gear leg until it is fully seated into the

connector.

3. Connect both springs to the center frame and the landing gear legs. Mind your fingers when

mounting the springs.

Unfolding the Aircraft

1. Gently lift the frame arm. Twist the red knob to lock each arm in place. To store, untwist the knob

and lower the frame arm.

2. Unfold the propellers.

3. Unfold the GPS-Compass Pro and ensure that all the arrows on the GPS-Compass Pro point

toward the front of the aircraft.

Note the

orientation

Note the

Orientation

Attach