dji PHANTOM 4 PRO 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} dji PHANTOM 4 PRO에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji PHANTOM 4 PRO 16 페이지.
dji PHANTOM 4 PRO에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (20 페이지)
페이지 인쇄
3 — How to Fly
Learn to Fly Manually
Although DroneDeploy automates
mapping flights, it's important to have
the skills to take over and fly manually
if necessary.
Review your DJI Phantom 4 Pro
manual and practice flying manually to
familiarize yourself with the drone.
Plan Automated Mapping Flights
The DroneDeploy app makes it quick
and easy to automatically fly your drone
to capture imagery needed for mapping.
To plan your first flight, open the
DroneDeploy app and click the
"Plan" button.
If you are planning in a location other
than your current location, click the
magnifying glass icon at the top left of
the screen to search for the area you
want to map.
To change the area you want to map,
either tap and drag the center of the
map to move the entire area, or tap and
drag the circles on the corners of the
flight plan to define the map perimeter.
If you want to add additional points,
tap and drag the faint circles on the
straight lines.
In the sidebar, you will see adjustment
sliders for the altitude and direction of
flight. Adjust these as needed based
upon the goals of your mission, and
save your flight plan.
To change the overlap of each image
captured, tap the "Advanced" text at
the bottom of the sidebar.
6
We recommend the following
settings for agricultural mapping:
•
400 ft for most crop scouting
and large-area mapping (greater
than 60 acres. Standard 60%
overlap should be sufficient in
early stage or highly variable
fields, but up to 85% overlap
may be required for closed
canopy, late-stage fields where
the crops are uniform.
•
200-250 ft for maps that will be
used for stand analysis and plant
counting. If you plan to use an
app to generate a report, check
the imagery requirements to
make sure you capture imagery
at an appropriate resolution.
Standard 60% overlap should
be sufficient, but higher overlap
will reduce the likelihood of map
stitching failure.
Don't have a good connection
out in the field? You can also plan
flights on your your computer and
then sync them to your mobile
device for offline flight.
Have a shapefile or KML file
defining the field perimeter you
want to fly? Install the KML /
Shapefile Uploader app and then
upload your file when on the flight
planning screen.